The Belden 8760NH is an 18 AWG (16 x 30) Tinned copper, Pre Insulated, 1 twisted pair, Beldfoil ® Aluminium-Polyester shield with Z-fold, 20 AWG (7 x 28) tinned copper drainwire, LSNH jacket outer sheath.
Mechanical Properties
| Nominal Insulation Thickness: | 0.41mm |
| Nominal Diameter over Insulation: | 2.08mm |
| Nominal Inner Jacket Thickness: | 0.89mm |
| Nominal Inner Jacket Diameter: | 6.0mm |
| Armour wire size: | 0.9mm |
| Nominal Lay Length (10-12 PCD): | 78mm |
| Nominal Outer Jacket Thickness: | 1.30mm |
| Nominal Outer Diameter: | 10.4mm |
| Temperature rating: | -15 to +80°C |
| Insulation material: | PE |
| Inner jacket material: | LSNH (Chrome RAL 7037) |
| Outer jacket material (colour): | LSNH (Black) |
| Type shield and % coverage: | Aluminium-polyester 100% |
| Maximum pulling tension: | *N |
| Minimum Bend Radius: | 160mm |
| Specifications: | BS 7655 Section 6.1 Table 1 LTS 3 |
| Flame resistance: | IEC 332-3-C |
Electrical Properties
| Maximum Operating Voltage: | 300 V Rms |
| Maximum continuous current per conductor @ 25°C: | 5.2A |
| Nominal capacitance between conductors of a pair @ 1 kHz: | 79 nF/km |
| Nominal capacitance conductor to shield @ 1 kHz: | 144 nF/km |
| Nominal conductor DC resistance @ 20°C: | 22.7 Ohm/km |
| Nom. shield DC resistance @ 20°C: | 43 Ohm/km |
| Velocity of Propagation: | 66% |
Instrumentation and computer cables for data transmission applications (Label contains CE marking)
