A Belden 7860ENS CAT 6 Data / Networking cable, bonded SF / UTP LSNH with Belden's Datatwist ®. It is ideal for horizontal and building backbone supporting the Category 6 and 5e applications including 1000Base-T (Gigabit Ethernet), 100 Base-T, FDDI and ATM.
Cable Construction
| Conductor Material: | Solid bare copper ETP |
| Conductor Diameter: | AWG 23 |
| Insulation Material: | Polyethylene |
| Nominal Diameter over Insulation: | 1.35mm |
| Cable Core Pair: | 2 twisted bonded insulated conductors |
| Cable Core Cross Web: | Polyolefin |
| Number of Cable Pairs: | 4, all twisted together |
| Cable Colours: | Pair 1: White / Blue & Blue |
| Pair 2: White / Orange & Orange | |
| Pair 3: White / Green & Green | |
| Pair 4: White / Brown & Brown | |
| Cable Foil: | Overlapping Polyester foil over cable core |
| Foil & Braid Shielding Material: | Laminated aluminium / polyester |
| Position aluminium: | Facing outside in contact with drain wire |
| Drain wire material: | Solid tinned copper |
| Drain wire diameter: | AWG 26 |
| Braid material: | Solid tinned copper |
| Coverage: | ≥ 40% |
| Jacket Material: | LSNH |
| Diameter: | 7.4 ± 0.3mm |
| International standard: | ISO/IEC 11801 2nd edition (2002) and ISO/IEC 11801 Amendment 2 (2010) |
| European standard: | EN 50173-1 (2002) and EN 50173-1 Amendment 1 (2009) |
| U.S. Standards: | ANSI/TIA/EIA 568-B.2-1 (2002) |
| Reference standard: | ISO/IEC 61156-5 edition 2.0 (2009) |
Electrical Properties
Low frequency & D.C. at 20°C
| DC resistance conductor: | < 9.5 /100m |
| Resistance unbalance: within a pair / between pairs | < 2 / < 4 % |
| Insulation resistance | ≥ 5000 M.km |
| Dielectric strength conductor-conductor and conductor-screen (2 sec.) | 2.5 kV DC |
| Mutual capacitance | < 56 nF/km |
| Capacitance unbalance pair to ground | < 1600 pF/km |
| Nominal velocity of propagation (for information only) | > 0.6 c |
| Delay skew (differential delay) | ≤ 40 ns/100m |
| Transfer impedance according IEC 61156-5 | Grade 2 |
| Coupling attenuation according IEC 61156-5 | Type II |
| High frequency (at 20°), reference standard: ISO/IEC61156-5 | ||||||||||||
| TYPE | 1* | 4 | 10 | 16 | 20 | 31.2 | 62.5 | 100 | 155 | 200 | 250 | MHz |
| Attenuation | 2.1 | 3.8 | 6.0 | 7.6 | 8.5 | 10.7 | 15.5 | 19.9 | 25.3 | 29.1 | 33.0 | dB/100m |
| NEXT | 75.3 | 66.3 | 60.3 | 57.2 | 55.8 | 52.9 | 48.4 | 45.3 | 42.4 | 40.8 | 39.3 | dB/100m |
| PS NEXT | 72.3 | 63.3 | 57.3 | 54.2 | 52.8 | 49.9 | 45.4 | 42.3 | 39.4 | 37.8 | 36.3 | dB/100m |
| ACR | 73.2 | 62.4 | 54.3 | 49.6 | 47.3 | 42.1 | 32.9 | 25.4 | 17.1 | 11.6 | 6.3 | dB/100m |
| PS ACR | 70.2 | 59.4 | 51.3 | 46.6 | 44.3 | 39.1 | 29.9 | 22.4 | 14.1 | 8.6 | 3.3 | dB/100m |
| ACR-F | 70.0 | 58.0 | 50.0 | 45.9 | 44.0 | 40.1 | 34.1 | 30.0 | 26.2 | 24.0 | 22.0 | dB/100m |
| PS ACR-F | 67.0 | 55.0 | 47.0 | 42.9 | 41.0 | 37.1 | 31.1 | 27.0 | 23.2 | 21.0 | 19.0 | dB/100m |
| Return Loss | 20.0 | 23.0 | 25.0 | 25.0 | 25.0 | 23.6 | 21.5 | 20.1 | 18.8 | 18.0 | 17.3 | dB/100m |
| TCL level 1 | 40.0 | 34.0 | 30.0 | 28.0 | 27.0 | 25.1 | 22.0 | 20.0 | 18.1 | 17.0 | 16.0 | dB/100m |
| EL TCTL | 35.0 | 23.0 | 15.0 | 10.9 | 9.0 | 5.1 | dB/100m | |||||
| Impedance upper limit | 122.2 | 115.2 | 111.9 | 111.9 | 111.9 | 114.1 | 118.3 | 121.9 | 126.0 | 128.8 | 131.5 | Ω |
| Impedance lower limit | 81.8 | 86.8 | 89.4 | 89.4 | 89.4 | 87.7 | 84.5 | 82.0 | 79.3 | 77.6 | 76.0 | Ω |
| Propagation delay | 570 | 552 | 545 | 543 | 540 | 539 | 538 | 537 | 537 | 537 | 536 | dB/100m |
NOTE: Limits below 4MHz are for information only
Mechanical Properties
| Elongation at break of the conductors: | 72 VDC |
| Maximum continuous current per conductor (@25°C): | 1.5A |
| Temperature rating installation: | 0/50°C |
| Temperature rating operation: | - 30 / 60°C |
| Total cable weight: | 56 kg/km |
| Minimum bending radius (operation and installation) | 30 / 60mm |
| Maximum pulling strength: | 110N |
| Burning load: | 745 kJ/m |
| Smoke density acc. to IEC 61034-1/2 & EN50268-1/2; transmittance: | >60% |
| Amount of halogen acid gas acc. to IEC 60754-1/2 & EN50267-1/2; pH: | > 4.3 |
| Amount of halogen acid gas acc. to IEC 60754-1/2 & EN50267-1/2; Conductivity: | < 10μS/mm |
| Fire performance according IEC 60332-1 | Pass |
Cable Ordering
Please contact us if you would like to know more about this cable and place an order.
