A Rubber-sheathed flexible cable with copper core screen
Cable Features
- Ozone resistance
- high insulation resistance
- resistant against hot penetration
- low abrasion
- high notch resistance
- resistant against toils fat and chemicals
- MSHA, GOST-R and WUG approvals on request
- for SPEEDS and MINIMUM BENDING RADIUS
Cable Construction
| Conductor: | Flexible red copper conductor Cl. 5, acc to IEC 60228, DIN VDE 0295 |
| Insulation: | rubber EPR type 3G13 |
| Colour cores: | acc. to DIN VDE 0293-308, HD 308 S2 3 phase cores: brown-black-gray |
| Screen | |
| POWER 3E: | braid earth-conductor over the insulation |
| KON: | concentric between the inner and outer sheath |
| Inner sheath: | EPR compound GM1B |
| Outer sheath: | yellow, PCP compound 5GM5 |
Technical Details
| Temperature range | |
| Fixed installation: | – 40°C + 80°C |
| Flexible installation: | – 25°C + 80°C |
| Nominal voltage: | Uo/U 0,6/1 kV |
| Test voltage: | 3000 V |
| Operating voltage: | A.C. Uo/U = 0,7/1,2 kVD.C. Uo/U = 0,9/1,8 kV |
| Insulation resistance: | > 20 MOhm x km |
| Tensile strength: | 15 N/mm2 |
| Min. bending radius: | |
| fixed: | 4 x d |
| flexing: | 10 x d |
| free movement: | 15 x d |
| Fire resistant: | DIN VDE 0482, EN/IEC 60332-1-2 |
| Oil resistant: | DIN VDE 0473, part 811-2-1, par. 10,EN 60811-2-1, IEC EN 60811-1-2 |
Ordering Information
| No. of cores x cross-section n x mm2 |
Outer-Ø ca. mm. ± 10% |
Copper weight kg/km |
Cable weight approx. kg/km |
Tensile strength N |
AWG no.*) |
NSSHÖU…/3E |
|||||
| 3×1.5+3×1.5/3E | 13 | – | 290 | 68 | 16 |
| 3×2.5+3×2.5/3E | 15 | – | 335 | 113 | 14 |
| 3×4+3×4/3E | 17.5 | – | 500 | 180 | 12 |
| 3×6+3×6/3E | 19 | – | 600 | 270 | 10 |
| 3×10+3×10/3E | 23 | – | 885 | 450 | 8 |
| 3×16+3×16/3E | 27 | – | 1240 | 720 | 6 |
| 3×25+3×16/3E | 31 | – | 1720 | 1125 | 4 |
| 3×35+3×16/3E | 35 | – | 2240 | 1575 | 2 |
| 3×50+3×25/3E | 40.5 | 2016 | 3160 | 2250 | 1 |
| 3×70+3×35/3E | 45 | – | 3960 | 3150 | 2/0 |
| 3×95+3×50/3E | 51 | – | 5070 | 4275 | 3/0 |
| 3×120+3×70/3E | 57 | – | 6460 | 5400 | 4/0 |
| 3×150+3×70/3E | 63 | – | 7590 | 6750 | 250 MCM |
| 3×185+3×95/3E | 67.5 | – | 9330 | 8325 | 350 MCM |
NSSHÖU…/3E+ST |
|||||
| 3×2.5+3×2.5/3E+3×1.5ST | 18.5 | – | 520 | 113 | 14 |
| 3×4+3×4/3E+3×1.5ST | 19.5 | – | 600 | 180 | 12 |
| 3×6+3×6/3E+3×1.5ST | 20 | – | 670 | 270 | 10 |
| 3×10+3×10/3E+3×2.5ST | 23.5 | – | 1010 | 450 | 8 |
| 3×16+3×16/3E+3×2.5ST | 27 | – | 1290 | 720 | 6 |
| 3×25+3×16/3E+3×2.5ST | 31 | – | 1780 | 1125 | 4 |
| 3×35+3×16/3E+3×2.5ST | 35 | – | 2300 | 1575 | 2 |
| 3×50+3×25/3E+3×2.5ST | 40.5 | – | 3200 | 2250 | 1 |
| 3×70+3×35/3E+3×2.5ST | 45 | – | 4010 | 3150 | 2/0 |
| 3×95+3×50/3E+3×2.5ST | 51 | – | 5100 | 4275 | 3/0 |
| 3×120+3×70/3E+3×2.5ST | 57 | – | 6510 | 5400 | 4/0 |
| 3×150+3×70/3E+3×2.5ST | 63 | – | 7600 | 6750 | 250 MCM |
| 3×185+3×95/3E+3×2.5ST | 67.5 | – | 9400 | 8325 | 350 MCM |
NSSHÖU…/KON |
|||||
| 3×1.5/1.5KON | 12.7 | – | 275 | 68 | 16 |
| 3×2.5/2.5KON | 14.3 | – | 335 | 113 | 14 |
| 4×6/6KON | 20 | – | 657 | 360 | 10 |
| 4×10/10KON | 24.5 | – | 1050 | 600 | 8 |
| 5×2.5/2.5KON | 18 | – | 490 | 188 | 14 |
| 5×4/4KON | 20 | – | 640 | 300 | 12 |
| 5×6/6KON | 22.5 | – | 845 | 450 | 10 |
