Flexible single-core 26/45 kV acc. to DIN VDE 0250 part 813
Cable Features
- Small cable weight
- small outer diameter
- MSHA and WVG approvals on request
Cable Construction
| Conductor: | Flexible tinned copper conductor Cl. 5, acc to IEC 60228, DIN VDE 0295 |
| Conductor screen: | semi-conducting rubber compound |
| Insulation: | rubber EPR special compound |
| Core screen: | semi-conducting rubber compound |
| Color core: | natural color with black semi-conductive compound |
| Screen: | spiral of tinned copper wires |
| Outer sheath: | red, halogen-free compound acc. to DIN VDE 0207-24 |
Cable Technical Data
| Temperature range | |
| Fixed installation: | – 40°C + 80°C |
| Flexible installation: | – 25°C + 80°C |
| Temperature at conductor: | + 90°C |
| Nominal voltage: | Uo/U 26/45 kV |
| Test voltage: | 87000 V |
| Tensile load: | up to 15 N/mm2 |
| Railway network stability: | |
| for voltage pulses: | acc. to IEC 61287-1 |
| for sustained over voltage: | acc. to IEC EN 50163, appendix A, Zone C |
| Humidity resistance: | acc. to EN 50125-1 |
| Biological substance resistance: | acc. to EN 60721-3-5, class 5B2 |
| Chemical resistance: | acc. to EN 60721-3-5, class 5C2 |
| Fluid resistance: | acc. to EN 60721-3-5, class 5F3 |
| Mechanical stress: | acc. to EN 61373 cat.1 , class B |
| Ozone resistance: | acc. to IEC 92-350 |
| Halogen-free: | acc. to DIN VDE 0815, IEC 60754-1and EN 50267-2-1, IEC 60884-2 |
| Corrosivity of combustion gas: | test acc. to EN 50267-2-2 or IEC 60754-2 |
| Toxicity: | acc. to BS 6853 cat. 1b, EN 50305, NF F 16-101 Fo |
| Smoke density: | acc. to EN 50268-2 or IEC 61034-2and BS 6853 cat. 1b |
| Flame resistance: | acc. to IEC 60332-1, EN 50265-2-1 |
| Flame propagation: | acc. to IEC 60332-3 cat. C, BS 6853 cat. 1b, DIN EN 50266-2-4 cat. C, NF C 32-070 C1, NF F 16-101 Fo |
Cable Ordering Information
| No. of cores x cross section n x mm2 |
Outer-Ø ca. mm ± 10% |
Copper weight kg/km |
Cable weight approx. kg/km |
Tensile strength N |
AWG no.*) |
| 1×50/16 | 37 | – | 1900 | – | 1 |
| 1×70/16 | 39 | – | 2400 | – | 2/0 |
| 1×95/16 | 41 | – | 2700 | – | 3/0 |
| 1×120/16 | 43 | – | 3000 | – | 4/0 |
| 1×150/25 | 45 | – | 3700 | – | 250 MCM |
| 1×185/25 | 47 | – | 4200 | – | 350 MCM |
| 1×240/25 | 50 | – | 4500 | – | 450 MCM |
| 1×400/35 | 56 | – | 6400 | – | 750 MCM |
| 1×500/25 | 59,5 | – | 7400 | – | 950 MCM |
| 1×630/35 | 64 | – | 9200 | – | 1200 MCM |
