ABB MCB’s S200 / S200M

MCB´s protect installations against overload and short-circuit, warranting reliability and safety for operations.

The System pro M compact S 200 series satisfies most common requirements in terms of MCB´s, allowing the usage of them for domestic, industrial and commercial applications. All the MCB´s comply to IEC/EN 60898 and IEC/EN 60947-2 Standards.

Click to view the ordering information for the S 200 MCB and the S 200 M MCB or scroll down for more technical product information.

Miniature Circuit Breakers (MCBs)

• For domestic / residential installations in emerging markets: typical breaking capacities 3 / 4.5 / 6 kA
  • Compact Home SH 200 T, SH 200 L, SH 200
• For domestic or small commercial installations: up to 10 kA breaking capacity
  • specials S440, S950/970
  • proM compact S200, S200 M
• For industrial installations up to 25 kA breaking capacity and specials
  • proM compact S200, S200M, S200P, S200U, S200UP
  • specials S280UC, S290
• Special, selective, back-up MCB’s for for utilities, with high breaking capacity (25 kA) and full selectivity to downstream breakers, range S 700
• For commercial and industrial applications with high breaking capacities and special features / accessories, ranges S200P, 290, S500, S610, S220, S800

ABB MCB’s held in stock

S 200 and S 200 M MCB Features

• Clear contact position indication in red/green (“real CPI”)
• Unique, patented twin terminal with captive screws and an increased opening for cables up to max. 35 mm2, finger-proof (IP20)
• Busbar slot in the back for best visibility during installation
• High performance at an increased rated voltage for marine and industrial applications: 10 kA/15 kA at Ue = 440 V AC acc. to IEC/EN 60947-2
• Individual product identification code
• Approved acc. to IEC/EN 60898-1, IEC/EN 60947-2 and
• UL 1077/CSA 22.2 No. 235 for global use

System Pro M S 200 / S 200 M Compact General Features and Breaking Capacities

* < 50A
**Only up to 40A; 10kA up to 50/63A

ABB S 200 / S 200 M MCB Technical Data

	S 200	S 200 M
General Data
Standards	IEC/EN 60898-1, IEC/EN 60947-2UL 1077	IEC/EN 60898-1, IEC/EN 60947-2UL 1077, CSA 22.2 No. 235
Poles	1P, 2P, 3P, 4P, 1P+N, 3P+N
Tripping Characteristics	B, C, D, K, Z
Rated current In	0.5 up to 63 A
Rated frequency	50/60 Hz
Rated insulation voltage Ui	250 V AC (phase to ground), 500 V AC (phase to phase)
Overvoltage Category	III
Pollution Degree	3
IEC/EN 60898-1
Rated operational voltage Un	1P: 230/400 V AC; 1P+N: 230 V AC; 2P, 3P, 4P: 400 V AC; 3P+N: 400 V AC
Max. power frequency recovery voltage Umax	1P: 253 V AC; 1P+N: 253 V AC; 2P, 3P, 4P: 440 V AC; 3P+N: 440 V AC; 1P: 72 V DC; 2P: 125 V DC
Min. operating voltage	12 V AC, 12 V DC
Rated short-circuit capacity Icn	6 kA	10 kA
Energy limiting class (B, C up to 40 A)	3
Rated impulse withstand voltage Uimp (1.2/50 µs)	4 kV (test voltage 6.2 kV at sea level, 5 kV at 2,000 m)
Dielectric test voltage	2.0 kV (50/60 Hz, 1 min)
Reference temperature for tripping characteristics	B, C, D: 30 °C
Electrical endurance	In < 32 A: 20,000 ops. (AC), 1,000 ops. (DC); one cycle 2 s – ON, 13 s – OFF
	In ≥ 32 A: 10,000 ops. (AC), 1,000 ops. (DC); one cycle 2 s – ON, 28 s – OFF
UL/CSA
Rated voltage	1P: 277 V AC, 60 V DC 2…4P: 480 Y/277 V AC, 110 V DC	1P: 277 V AC, 60 V DC2…4P: 480 Y/277 V AC, 125 V DC
Rated interrupting capacity	6 kA (AC), 10 kA (DC)
Application	Suppl. prot. for general use. Application Codes: TC2, OL0, SC: U1
Electrical endurance	6,000 ops. (AC), 6,000 ops. (DC); one cycle 1 s – ON, 9 s – OFF
Mechanical data
Housing	Insulation group II, RAL 7035	Insulation group I, RAL 7035
Toggle	Insulation group II, black, sealable
Contact position indication	Marking on toggle (I ON/0 OFF), Real CPI (red ON/green OFF)
Protection degree acc. to EN 60529	IP201), IP40 in enclosure with cover
Mechanical endurance	20,000 ops.
Shock resistance acc. to IEC/EN 60068-2-27	25 g, 2 shocks, 13 ms
Vibration resistance acc. to IEC/EN 60068-2-6	5 g, 20 cycles at 5…150…5 Hz with load 0.8 In
Environmental conditions acc. to IEC/EN 60068-2-30	28 cycles with 55 °C/90-96 % and 25 °C/95-100 %
Ambient temperature	-25 … +55 °C
Storage temperature	-40 … +70 °C
Installation
Terminal	Failsafe bi-directional cylinder-lift terminal
Cross-section of conductors (top/bottom)	solid, stranded: 35 mm2 / 35 mm2flexible: 25 mm2 / 25 mm2
	14 – 4 AWG 3)
Cross-section of busbars (top/bottom)	10 mm2 / 10 mm2
	14 – 8 AWG2)
Torque	2.8 Nm
	18 in-Ibs.
Screwdriver	No. 2 Pozidrive
Mounting	On DIN rail 35 mm acc. to EN 60715 by fast clip
Mounting position	any
Supply	optional
Dimensions and weight
Mounting dimensions acc. to DIN 43880	Mounting dimension 1
Pole dimensions (H x D x W)	88 x 69 x 17.5
Pole weight	approx. 115 g
Combination with auxiliary elements
Auxiliary contact	Yes
Signal/auxiliary contact	Yes
Shunt trip	Yes
Undervoltage release	Yes
Motor Operating Device	Yes

1) Also fulfilling the requirements acc. to the protection degree IPXXB

2) AWG 18 – 8 acc. to UL 486A – 486B

3) AWG 18 – 4 acc. to UL 486A – 486B

Click to view the ordering information for the S 200 MCB and the S 200 M MCB