Flexible Screened Round Festoon Cables
0.6/1 (1.2) kV
Applications
Heavy duty rubber cable for power supply. For festoon applications with mechanical tensile stress compared with dynamic stress. Especially developed to prevent electrical and electromagnetic disturbances and to protect parallel laying control cables against interferences.
Design
| 1. Conductor | Flexible, plain copper, “FSC” better than IEC 60228 class 5 |
| 2. Insulation | RHEYCLEAN-HEPR better than IEC 60502-1 |
| 3. Inner sheath | Special synthetic rubber, better than EM6, according to prEN 50363 |
| 4. EMC – Screen | Composite screen of tinned copper wires and synthetic threads. Coverage >80% |
| 5. Outer sheath | Rubber compound EM7 according to prEN 50363 |
| Colour: | Black |
Marking
RHEYFESTOON(C) (N)3GRDGC5G-J
Number of cores – cross-section 0.6/1 kV – NEXANS – year VDE Reg.No. 7891
Cores Identification
DIN VDE 0293 part 308/
HD 308 S2
6 cores design:
– three phase cores: brown – black – grey
– three protection cores: green/yellow in the interstices
Standards
In line with DIN VDE 0250 part 812.
VDE Reg.No. 7891
Mechanical Properties
| Tensile stress of the conductor | static | 15 N/mm2 |
| dynamic | 30 N/mm2 | |
| Bending radii | according to DIN VDE 298, | |
| Tests | Bending test | |
| Festoon speed | up to 240 m/min (higher speed upon request) |
Chemical Properties
Oil resistant.
For indoor and outdoor applications. Moisture, UV and ozone resistance.
Flame-retardant according to IEC 60 332 part 1.
Electrical and Thermal properties
| Nominal voltage | Uo/U | 0.6/ 1 kV |
| Maximum operating voltage in AC systems | Um | 1.2 kV |
| Maximum operating voltage in DC systems | Vm | 1.8 kV |
| Test voltage: | ||
| – Power | 3.0 kV in AC | |
| – Control | 2.0 kV in AC | |
| Current rating (A) | according to DIN VDE 0298 part 4, | |
| see electrical characteristics page 3.2 B | ||
| Max. temperature at the conductor: | ||
| – In service | + 90 °C | |
| – under short-circuit conditions | + 250 °C | |
| Max. surface temperature: | ||
| – fixed installation | – 50 °C up to + 80 °C | |
| – mobile operation | – 35 °C up to + 80 °C | |
LSHF Halogen Free Flat Cables
| Number of cores and nominal cross-section |
Outer diameter | Weight approx. |
Max. tensile load. |
|
| (mm2) | Min. (mm |
Max. (mm) |
||
| (kg/km) | (N) | |||
| 4×4 | 18 | 20 | 600 | 240 |
| 4×6 | 19 | 21 | 780 | 360 |
| 4×10 | 20 | 22 | 1,050 | 600 |
| 3×16 + 3×16/3 | 22 | 25 | 1,200 | 960 |
| 3×25 + 3×16/3 | 26 | 29 | 1,600 | 1,500 |
| 3×35 + 3×16/3* | 29 | 32 | 2,000 | 2,100 |
| 3×50 + 3×25/3* | 33 | 36 | 2,500 | 3,000 |
