250µm Bare Fibre Optical Cable
Used for the manufacture of launch leads
- Available in single mode (OS1), 62.5 / 125 (OM1), 50/125, OM2, OM3 and OM4.
900µm Buffered Fibre Optical Cable
Used for the manufacture of pigtails and available in tight buffer or semi-loose buffer
- Available in Single-mode(OS1), 62.5 / 125 (OM1), 50/125, OM2, OM3 and OM4
- Suitable for direct terminations
Simplex Fibre Optic Cable
Manufactured into pigtails and patch leads for internal applications.
Construction, one 900µm tight or semi-tight buffered fibre, surrounded by aramid yarn for strength and protection and over sheathed with a low smoke zero halogen jacket.
- Available in single mode (OS1), 62.5 / 125 (OM1), 50/125 (OM2) OM3 and OM4
- Suitable for direct terminations
- Nominal OD 2.8mm (alternative OD’s available upon request)
- Operating temperature -10°C to +70°C
- Installation tension 150N
- Minimum installation bend radius 140mm
- Crush resistance 1000N
- Riser rated UL 1666 available
- Cables tested to IEC 60754-1-2 and En-187000
- LSZH sheath meets IEC 60332-1-2
- Duplex Zip Twin Fibre Cable
Duplex Zip Twin Fibre Cable
Manufactured into patch leads for internal applications
Construction is two 900µm tight or semi-tight buffered fibres surrounded by aramid yarns and over sheathed with a low smoke zero halogen jacket, joined together with a ‘web’. Sub units can be easily separated giving two simplex cables.
- Available in single mode (OS1), 62.5 / 125 (OM10, 50/125 (OM2) OM3 and OM4
- Suitable for direct terminations
- Nominal OD 2.8mm x 5.6mm (alternative OD’s available upon request)
- Operating temperature : -10°C to +70°C
- Installation Tensions : 300N
- Minimum installation bend radius : 140mm
- Crush resistance : 1000N
- Riser rated UL 1666 available
- Cables tested to ieC 60754-1-2 and EN-187000
- LSZH sheath meets IEC 60332-1-2
- Mini zip twin nominal OD 1.8mm x 3.6mm
- Installation tension 200N
- Minimum installation bend radius 90mm
- Cables tested to IEC 60754-1-2
- LSZH sheath meets IEC 60332-1-2
